BWSZM - EP-S CARTRIDGE (BLACK), R64-0002
- MSDS: BWSZM
- Manufacturer: CANON USA INC
- Product Name: EP-S CARTRIDGE (BLACK), R64-0002
- National Stock Number: 6850-01-345-9384
Product Identification
Product ID:EP-S CARTRIDGE (BLACK), R64-0002
MSDS Date:09/25/1989
FSC:6850
NIIN:01-345-9384
MSDS Number: BWSZM
Responsible Party
LAKE SUCCESS, NY 11040-1113
US
Emergency Phone: 516-488-6700
Info Phone: 516-488-6700
Cage: 1BA63
Contractor
Telephone: 516-328-5600
Cage: 1BA63
Ingredients
ACRYLIC ACID, BUTYL ACRYLATE, SYTRENE POLYMER
CAS: 25586-20-3
Fraction By Weight: 30-40%
OSHA PEL N/K
ACGIH TLV: N/K
STYRENE POLYMER W/MONOBUTYL MALEATE
CAS: 25215-62-7
Fraction By Weight: 20-30%
OSHA PEL N/K
ACGIH TLV: N/K
IRON OXIDE
CAS: 1317-61-9
Fraction By Weight: 30-40%
OSHA PEL 10 MG/M3
ACGIH TLV: 5 MG/M3
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE, UNLESS
CARTRIDGE IS BROKEN. INHALATION:GASPING. DO NOT BREATHE DUST.
EYE:NO SPECIFIC HAZARD IS KNOW TO MFR. HOWEVER, ANY MATERIAL THAT
CONTACT EYE MAY BE IRRITATING. SK IN:LOW HAZARD FOR INDUSTRIAL
HANDLING. THERE IS NO DATA AVAILABLE FOR CHRONIC EFFECTS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . SKIN:FLUSH W/COPIOUS
AMOUNTS OF WATER. CALL MD . EYES:FLUSH WITH PLENTY OF WATER FOR @
LEAST 15 MINUTES.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE. USE NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:TONER MATL, LIKE MOST ORG MATL IN POWDER
FORM, IS CAPABLE OF CREATING DUST EXPLOSION.
Accidental Release
Spill Release Procedures:TONER SPILLAGE DOES NOT OCCUR IN NORMAL
OPERATION/HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF DUST.
SWEEP MATERIAL ONTO PAPER & PLACE IN FIBER CARTON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD SAFETY GLASSES .
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>212F,>100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.6(H*2O=1)
Evaporation Rate & Reference:NEGLIG (BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER, WITH SLIGHT PLASTIC ODOR
Percent Volatiles by Volume:NEGLIG
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS W/ANY OTHER ORG MATL, COMBUST WILL
PRODUCE CARBON DIOXIDE & PROBABLY CARBON MONOXIDE.
Disposal
Waste Disposal Methods:THE WASTE TONER COULD BE CONSIDERED AS PLASTIC
WASTE. FOR INCIN, PACKAGE IT ADEQUATELY. DO NOT DISPERSE TONER INTO
FIRE. DISPOSAL MAY BE SUBJECT TO FEDERAL, STATE OR LOCAL LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.